The functional dimensions of the profile sections can now be ensured automatically and within seconds thanks to FLOW.MATIC – the further development of FLOW.CONTROL. FLOW.MATIC is based on the proven FLOW.CONTROL technology. The temperature and thus the melt flow is controlled directly in the die by heating or cooling. FLOW.MATIC now measures the filling level of the individual profile sections and together with the die function FLOW.CONTROL, it builds up a fully automatic control loop. The reaction takes place visibly within a few seconds. This results in constant profile measurements even when process fluctuations occur and without any manual intervention. The settings can be reproduced at any time. Benefits are:
Estimated Savings due to material savings and lower scrap rate: FLOW.CONTROL: ~ € 27.000 p.a. FLOW.MATIC: ~ € 48.000 p.a. Example window frame: 12 kg/m, 5000 p.a. production time, 1.2 €/kg material cost, 350 kg/hr output." target="_blank"> Greiner Extrusion Group is represented in Oceania by HBM Plastics Technologies |
Flow.Matic |
Flow.Matic, flow to extrusion |
Flow.Control |
Latest News
Previous
Next
Riggs Autopack depositor helps Drunken Sailor out of a jam
Riggs Autopack...
Ogilvie & Co Streamlines Production
Ogilvie & Co...
Closing the PET Recycling Loop
HBM Plastics & Packaging...
Sacmi’s New System Produces Tethered Bottle Caps
Sacmi’s New...
New ALPS TBIS™ Total Bottle Inspection Solution
New ALPS...
Thermoformed Ultra-Large Greenhouse Trays utilising Battenfeld Cincinnati Extruders
Danish Manufacturer Staal...
New Agency: Battenfeld-Cincinnati Extrusion Equipment for Pipe, Profile & Sheet
HBM New Agent for...
New Agency: Finpac Shrink Sleevers
HBM's New Shrink...